Flame Retardant Craftsman Trousers

SKU
505088
- Cantex WS
  •  
     
  • EN ISO 11612
    A1+A2 B1 C1 F1
  • EN 61482-2
    APC 1
    ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
  • EN 1149-5
  • EN ISO 20471
    CL.1
  • EN ISO 15797
    50 WASHES
  • TRANEMO SKINSAFE

PFAS-free and Inherent Flame Retardant Hi-Vis trousers with nail pockets, front in Cantex Weld and back in Cantex Stretch. Cantex Stretch provides the trousers with flexibility and gives you freedom of movement with high levels of comfort.

Double tool pockets with tool strips. Side pockets. Back pockets. Hammer loops. Left cargo pocket with flap, mobile phone pocket, pencil pocket and concealed D-ring. Right cargo pocket with an extra tool pocket, ruler pocket with concealed knife button with loop. Kneepad pockets with two different placement levels. Adjustable foot width with press studs. Reinforced back hem. Contrast stitching.

Size
30"- 50"R, 32"- 40"T, 30"- 48"S
C44-64, C146-156, D84-120

Product information

Quality

802: Barricader EP - 99% para-aramid / 1% antistatic, 545 g/m²
Inherent Flame Retardant reinforcement fabric with good protection against molten metal splashes.
Test result fabric
EN ISO 11612 A1 B1 C1 D3 E3 F2
EN ISO 11611 class 1
EN 61482-1-2:2014 APC 1
EN 1149-3
EN ISO 20471 for fluorescent colours
884: Cantex Stretch - 48% modacrylic / 35% cotton / 12% polyamide / 3% elastic fibre / 2% antistatic, 365 g/m²
Inherent Flame Retardant fabric with highest possible protection against molten iron. Stretch fibre in the fabric increases the comfort. PFAS-free finish. To maintain chemical protection (EN 13034), the clothing must be re-impregnated after washing.
Test result fabric
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN ISO 11612 C2 (884+920)
EN ISO 11611 class 2
EN 61482-1-2:2014 APC 1
IEC 61482-1-1:2019, ELIM: 12 cal/cm², ATPV: 18 cal/cm²
LOI 29,5%
EN 1149-3
EN 13034 (only for acid and alcaline)
EN ISO 20471 for fluorescent yellow
885: Cantex Weld - 50% modacrylic / 36% cotton / 12% polyamide / 2% antistatic, 365 g/m²
Inherent Flame Retardant fabric with highest possible protection against molten iron. Suitable for welding and grinding. PFAS-free finish. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing.
Test result fabric
EN ISO 11612 A1+A2 B1 C1 E3 F1
EN ISO 11612 C2 (885+920)
EN ISO 11611 class 2
EN 61482-1-2:2014 APC 1
IEC 61482-1-1:2019, ELIM: 13 cal/cm², EBT: 16 cal/cm²
LOI 29,0%
EN 1149-3
EN 13034 (only for acid and alcaline)
EN ISO 20471 for fluorescent yellow

Washing instructions

Certifications

  •  
     
    The CE marking indicates that the product is type examined according to the Regulation (EU) 2016/425.
  • EN ISO 11612
    A1+A2 B1 C1 F1
    EN ISO 11612 - The standard specifies protective clothing to protect against heat and flame.
  • EN 61482-2
    APC 1

    EN 61482-2 - The standard specifies protective clothing that protects against the thermal hazard of an electric arc.

    ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm²
  • EN 1149-5EN 1149-5 - The standard specifies protective clothing used in explosive environments (ATEX).
  • EN ISO 20471
    CL.1
    EN ISO 20471 - The standard specifies high visibility clothing used in trafficier environments or in other environments where extra visibility is required. Supersedes EN 471.
  • EN ISO 15797
    50 WASHES
    EN ISO 15797 - The standard specifies procedures for industry laundry and finishing of workwear.
  • TRANEMO SKINSAFETRANEMO SKINSAFE - Multi-layer system designed to protect against flame, heat and Electric Arc injuries.